Hikvision DS-K1107MK Mifare Reader

In stock

SKU

76301MK

Vendor Part No

DS-K1107MK

Equipped with the 32-bit high-speed processor
RS-485 and Wiegand (W26/W34) protocol
Build-in EM card reading module (Frequency:125KHz). Supports reading ID card No. (DS-K1107E/DS-K1107EK)
Build-in Mifare card reading module (Frequency: 13.56MHz). Meets the standard of ISO 14443-A. Supports reading Mifare card No (DS-K1107M/DS-K1107MK)
Supports tampering alarm
Built-in buzzer for identifying the reading status
Online upgrade function
Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader
More information please refer to datasheet

System Parameters
Card Reading Distance:		EM Card: ≤100 mm (≤3.94") Mifare Card:≤50 mm (≤1.97")
ID Settings:		Setting by the DIP Switch on the Main Board
Processor:		32-bit

General
Key Board:		No Keypad (DS-K1107E and DS-K1107M) Keypad with 12 Keys (0~9, *, #) (DS-K1107EK and DS-K1107MK)
Audio Alert:		Beeper
Power Supply:		12VDC
Communication Interface:		RS-485 / Wiegand (DIP Switch)
Power Consumption:		≤2W
LED Indicator:		Power Indicator; Status LED Indicator
Protection Level:		IP 65 Water-Proof
Installation:		Wall mounting with screws. The Gang Box is not supported.
Temper-Proof:		Support
Working Humidity:		10% to 90% (Non-Condensing)
Working Temperature :		-20°C to +65°C (-4°F to +149°F)
Dimensions (L×W×H):		115mm × 44mm × 22mm (4.53''×1.73''×0.87'')